Hello dolly

Carl writes…

With the hole now drilled in the roof it was necessary to remove the 2 ton clasp on the block & tackle to expose the chain link. This granted additional height to remove the domed roof. The chain was then bolted to the roof. Making sure the old bolts securing the dome were free, I carefully positioned the kiosk directly under the gantry, thanks to my ‘dolly skids’. These ’skids’ allow me to move a K6, weighing 750 kgs, with ease on flat smooth ground. With a few grasps at the load chain the damaged roof was lifted clear of the transom rails, to which the roof section was pulled clear of the K6 on the gantry. The K6 was then pushed clear of the beamed gantry.